CATEGORIES
FEATURED PRODUCTS
One piece type 17.5inch HDD rock tools PDC hole opener
1.Cutting Structure
In response to the characteristics that inserts in different areas on the cone have different cutting actions, conical inserts are placed in permanent contact area and wedge inserts are placed in alternative contact area so that the drilling efficiency is greatly improved. Wear resistance of cutting structure is enhanced by setting diamond inserts in the permanent contact area of the cone where inserts are severely worn. Tungsten carbide inserts are placed on cone top face to protect cone body from abrasive erosion.
2.Gauge Structure
With active cutting gauge protection inserts on bit body, the bit has good gauge protection and up drill capability.
3.Bearing Structure
High precision journal bearing. Balls lock the cone.Hardfacing heard bearing surface. Cone bearing inlaid with friction-reducing alloy. Abrasion resistance and seizure resistance of the bearing are improved. Compared with three cone bit, the leg bearing is bigger, so it can receive higher WOB and high reliability.
4.Hydraulic Design
Small angled watercourse design increased the shirttail thickness and can effectively prevent the watercourse erosion.Optimized hydraulics structure improves the clearing capability and increases ROP.
5. Product Application
It is suitable for sidetracking, deep well drilling and old well
| Bit Size | 17.5″ (444.5MM) |
| Bit Type | 123 223 323 324 424 433 524 634 |
| Connection | Pin*box (IF,REG,NC,FH) |
| Nozzle Qty | 3/4/5/6/7/8/9NZ (according to your demands) |
| Make up Torque(KN.m) | 4 -4.8/6-7.5/9.5-12/16-22/38-43/46-54 |
| Formation | soft ,medium soft ,hard,medium hard,very hard formation |
HDD TOOLS ,PDC HOLE OPENER,PDC reamer,17.5INCH pdc reamer, one piece rock hole opener
